Androidbiits.com will help you in performing a hard reset on Huawei P40 (ANA-AN00, ANA-TN00). It comes with Leica optics, splash resistant body, Mali-G76 MP16 graphics processing unit, Kirin 990 5G processor, 50MP rear camera, optical image stabilization support, 8.5mm thickness, 1080 x 2340 pixels screen resolution, phase detection autofocus support and 6.1 inches display. If you are facing any issue on your device, then you can use some simple steps to perform a hard reset. It will allow you to remove pattern lock and screen lock in Huawei P40 (ANA-AN00, ANA-TN00). Sometimes you might have forgotten the lock screen password of your device. You might have faced difficulty in using your Huawei P40 (ANA-AN00, ANA-TN00). If your device is not responding, then hard reset is a good solution. Androidbiits.com will publish the step-by-step instructions using which you can perform a hard reset on Huawei P40 ANA-AN00. Previously, I have published the simple instructions for resetting Oppo Reno3 5G (PDCM00, PDCT00). Now, I will discuss about the step-by-step tutorial to perform a hard reset on Huawei P40.
I am expecting that you will be able to master reset Huawei P40 (ANA-AN00, ANA-TN00) without any problem after reading the tutorial written in Androidbiits.com. Factory reset will remove all bugs from your phone. It will let you enjoy original factory settings on Huawei P40 (ANA-AN00, ANA-TN00). Factory reset will also let you enjoy many other benefits. You should note that you don’t need root, unlock bootloader or TWRP Recovery to hard reset your device. The most important thing is that your device will not lose warranty after performing a factory reset.
If you have forgotten the lock screen password of your Huawei P40 (ANA-AN00, ANA-TN00), then you must perform a hard reset. It will let you bypass screen lock. You must save your private documents securely including messages and contacts before performing a hard reset on Huawei P40 (ANA-AN00, ANA-TN00), because all data will be deleted from your device after performing a hard reset.
Below are the steps using which you can perform a hard reset on Huawei P40 (ANA-AN00, ANA-TN00). Androidbiits.com will not be responsible if your device got broken during the process of factory reset. Huawei P40 battery must be above 86 percentage before performing hard reset. You must follow these steps at your own risk.
How to Master Reset Huawei P40 (ANA-AN00, ANA-TN00) Easily [Simple Steps]
1. First you have to turn off your Huawei P40. Then press Volume up button and Power button simultaneously.
2. Release Volume up button and Power button after you see Logo on screen. Your Huawei P40 will enter into Stock Recovery mode after a few seconds.
3. Select “Clear data” option using volume button, then press power button to confirm it.
4. Select “Factory reset” option using volume button, then press power button to confirm it.
5. Type “YES” on your Huawei P40, then touch “Factory reset” button.
6. You have to tap “Factory reset” option again on your phone.
7. Tap “Back” option on your phone after performing a hard reset.
8. Tap “Restart” option.
You have successfully performed a hard reset on Huawei P40 (ANA-AN00, ANA-TN00). If you are experiencing any difficulty while performing hard reset on your Huawei P40, then don’t hesitate to share your issue with Androidbiits.com. Please submit your email address and subscribe to get more information regarding your Huawei P40. You must check your email to activate subscription.