How to Enter Fastboot Mode on Lenovo Tab M10 HD (2nd Gen) (TB-X306X, TB-X306XA, TB-X306FC) Easily [Simple Steps]

Androidbiits.com will help you to enter fastboot mode on Lenovo Tab M10 HD (2nd Gen) (TB-X306X, TB-X306XA, TB-X306FC, TB-X306NC). This smartphone comes with FM radio, 5000mAh battery, 5MP front facing camera, 4GB Random access memory, proximity sensor, 3.5mm audio jack, 64GB internal storage space, accelerometer sensor, Android 10 operating system and Wi-Fi Direct support. If you are planning to write data directly to the internal memory of Lenovo Tab M10 HD (TB-X306X, TB-X306XA), then you have to enter into fastboot mode. As we know writing data directly to the internal memory is an important task. You can do it after entering your phone into fastboot mode. Androidbiits.com will publish the step-by-step instructions using which you can enter fastboot mode on Lenovo Tab M10 HD TB-X306FC. Previously, I have published the simple instructions for entering Lenovo Tab M10 HD TB-X306X into recovery mode. Now, I will discuss about the step-by-step tutorial to enter fastboot mode on Lenovo Tab M10 HD.

Fastboot mode is very important for all Android smartphone users. I am hoping that you will be able to boot fastboot mode on Lenovo Tab M10 HD (TB-X306X, TB-X306XA) without any problem after reading the tutorial written in Androidbiits.com. You can enter fastboot mode using button combinations. You have to press a combination of buttons on Lenovo Tab M10 HD (TB-X306FC, TB-X306NC) to enter into fastboot mode. Every Android smartphone users must know the method for entering into fastboot mode. It allows users to unlock bootloader and relock bootloader. It allows users to install custom recovery. It also allows users to install ROM on phone.

There are two methods for entering fastboot mode on Lenovo Tab M10 HD (TB-X306X, TB-X306XA). The first method is ADB method. You have to use ADB for entering into fastboot mode. It requires Android SDK Platform tools. You have to download and install SDK Platform tools on your PC. Then, you have to connect your Lenovo Tab M10 HD (TB-X306FC, TB-X306NC) with PC after activating Developer options and USB Debugging. The second method is button combination method. You can enter fastboot mode using button combinations on Lenovo Tab M10 HD. It does not require any tool. This is the most popular method for entering into fastboot mode.

Below are the steps using which you can enter fastboot mode on Lenovo Tab M10 HD (TB-X306X, TB-X306XA). Androidbiits.com will not be responsible if your device got broken during this process. Lenovo Tab M10 HD battery must be above 82 percentage before entering into fastboot mode. You must follow these steps at your own risk.

How to Enter Fastboot Mode on Lenovo Tab M10 HD (2nd Gen) Easily [Simple Steps]

1. Press the power button and switch off your Lenovo Tab M10 HD.

2. Press Volume up button, Volume down button and Power button simultaneously on your phone.

3. Release Volume up button, Volume down button and Power button after you see Logo on screen. Your phone will enter into Recovery Mode after a few seconds.

7. Select “Enter fastboot” option. You can use volume button to select this option.

8. Use power button to confirm “Enter fastboot” option.

How to Enter Fastboot Mode on Lenovo Tab M10 HD (TB-X306X, TB-X306XA, TB-X306FC) using ADB [Simple Steps]

1. First you have to enable Developer options and USB Debugging on Lenovo Tab M10 HD.

2. Download USB driver and install it on PC.

3. Attach your Lenovo Tab M10 HD with computer via USB cable.

4. Download SDK Platform tools Zip File.

5. Open platform-tools folder on your PC after extracting the ZIP file.

6. Inside the platform-tools folder, you have to press the Shift Key and Right mouse click on your PC to open the Command Window. You can also type “cmd” in the address bar and press “enter” button to open the Command Window.

7. Enter the following command to check the connected device:

adb devices

8. If your phone is successfully connected with PC, then you will be able to see a serial number.

9. Enter the following command to put Lenovo Tab M10 HD into Fastboot mode:

adb reboot bootloader

In this way you can enter fastboot mode on Lenovo Tab M10 HD (TB-X306X, TB-X306XA). If you are experiencing any difficulty while entering into fastboot mode, then don’t hesitate to share your issue with Androidbiits.com. Please submit your email address and subscribe to get more information regarding your Lenovo Tab M10 HD. You must check your email to activate subscription.

Enter your email address:

Delivered by FeedBurner

Leave a Reply