Today, Androidbiits.com will share a stunning news with Tecno Spark 20 Pro Plus KJ7 H895Y owners who are trying to root their device. It comes with 108MP rear camera, 393 pixels per inch (ppi) density, high dynamic range support, 5000mAh battery, gyro sensor, phase detection auto focus support and Mediatek Helio G99 Ultimate processor. If you have managed to unlock bootloader in Spark 20 Pro Plus KJ7, then you can install Magisk on it by patching its stock firmware boot image using Magisk v27.0. According to XDA Developer topjohnwu, installing Magisk on Android smartphone will give root. So you can root Spark 20 Pro Plus KJ7 by installing Magisk. If you have successfully unlocked bootloader, then Androidbiits.com will help you in rooting Spark 20 Pro Plus KJ7. You can use Magisk v27.0 to patch boot image of your phone. Previously, I have published the simple instructions for unlocking bootloader in Tecno Spark 20 Pro Plus. Now, I will discuss about the step-by-step tutorial to root Tecno Spark 20 Pro Plus.

I am expecting that you will be able to root Spark 20 Pro Plus KJ7 H895Y using Magisk v27.0 without experiencing problem after reading the tutorial written in Androidbiits.com. Magisk v27.0 is developed by XDA Senior Recognized Developer topjohnwu. Spark 20 Pro Plus KJ7 may lose warranty after being rooted. This method will remove the factory restrictions. It will let you enjoy many Custom ROMs on your phone. This method will also let you enjoy many other benefits on your phone.

You must save your private documents securely including messages and contacts before rooting Spark 20 Pro Plus KJ7 H895Y using Magisk v27.0, because there is a possibility of losing all documents from your phone. If you are a big fan of Custom ROM and planning to install it on your Spark 20 Pro Plus KJ7, then you must be eagerly waiting to root your phone.

Below are the steps using which you can root Spark 20 Pro Plus KJ7. Androidbiits.com will not be responsible if your phone got broken while being rooted using Magisk v27.0. Spark 20 Pro Plus battery must be above 96 percentage before following the rooting steps. You will not be able to root your phone without unlocking its bootloader.

How to Root Tecno Spark 20 Pro Plus KJ7 Easily [Simple Steps]

1. First you have to unlock bootloader in Tecno Spark 20 Pro Plus.

2. You have to search and download stock firmware for Tecno Spark 20 Pro Plus on your PC.

3. Find the “boot.img” file after extracting the stock firmware.

4. Download Magisk v27.0 apk. It is developed by XDA Senior Recognized Developer topjohnwu.

5. Download and install USB driver on desktop.

6. Activate USB debugging on your phone.

7. Attach your phone with desktop and transfer Magisk v27.0 apk and “boot.img” file to your phone.

8. Install Magisk v27.0 apk on your phone.

9. Start Magisk v27.0 on Tecno Spark 20 Pro Plus and choose “Select and Patch a File” option.

10. Select the stock “boot.img” file that you have transferred to your phone. Finally, you will get magisk_patched img file.

11. You have to download SDK Platform Tools ZIP file.

12. Open platform tools folder on your PC after extracting the ZIP file.

13. Copy the magisk_patched img file from Tecno Spark 20 Pro Plus to platform tools folder on your PC. You have to rename magisk_patched img file to “magisk_patched.img” file.

14. Connect your phone with PC via USB cable.

15. Inside the platform-tools folder, you have to type “cmd” in the address bar and press “enter” button to open the Command Window.

16. Enter the following command to check the connected device:

adb devices

17. If your device is successfully connected with PC, then you will be able to see a serial number.

18. Enter the following command to put Tecno Spark 20 Pro Plus into Fastboot mode:

adb reboot bootloader

19. Enter the following command to check Fastboot mode:

fastboot devices

20. If your phone is successfully entered into Fastboot mode, then you will be able to see a serial number.

21. Enter the following command to install “magisk_patched.img” file in your Tecno Spark 20 Pro Plus:

fastboot flash boot magisk_patched.img

If you are using A/B device, then enter the following command to install “magisk_patched” Boot Image:

fastboot flash boot_a magisk_patched.img

fastboot flash boot_b magisk_patched.img

22. Enter the following command after the installation process is completed:

fastboot reboot

You have successfully rooted Spark 20 Pro Plus KJ7 H895Y. If you are experiencing any difficulty while rooting Spark 20 Pro Plus, then don’t hesitate to share your issue with Androidbiits.com. Please submit your email address and subscribe to get more information regarding Tecno Spark 20 Pro Plus. You must check your email to activate subscription.