How to Update Samsung Galaxy Note 10.1 LTE SM-P605 to Android 4.4.2 KitKat XXUCNE2

Today, I am going to share some good news with Samsung Galaxy Note 10.1 LTE SM-P605 users. Now you can enjoy a new firmware update on your device. Android 4.4.2 KitKat XXUCNE2 has been released for Samsung Galaxy Note 10.1 (2014 Edition) LTE SM-P605. Well, I have recently published an article for installing Android KitKat XXU0ANE6 on Samsung Galaxy Tab 4 7.0 Wi-Fi. Now you can update Samsung Galaxy Note 10.1 LTE SM-P605 to Android 4.4.2 KitKat XXUCNE2.

Update Samsung Galaxy Note 10.1 (2014 Edition) LTE SM-P605 to Android 4.4.2 KitKat XXUCNE2

This is really a great news for Galaxy Note 10.1 LTE SM-P605 users. You can experience the improvement after installing KitKat XXUCNE2. The good news is that you can easily root your Samsung Galaxy Note 10.1 LTE SM-P605 after installing KitKat XXUCNE2. Well, you don’t need to install CWM recovery on Galaxy Note 10.1 LTE before updating it. Dear friend don’t forget to backup your contacts available on Galaxy Note 10.1 LTE before following the steps. Galaxy Note 10.1 LTE SM-P605 USB driver need to be installed on your PC for successful connection between your Note 10.1 LTE and PC.

Now you must be eagerly waiting to enjoy the new firmware on your Note 10.1 LTE SM-P605. Below are the steps using which you can install KitKat XXUCNE2 on Samsung Galaxy Note 10.1 LTE SM-P605. Androidbiits will not be responsible if your Note 10.1 LTE got corrupted during the update process. Well, your Galaxy Note 10.1 LTE SM-P605 battery level must be above 92% before following these steps.

How to Install Android 4.4.2 KitKat XXUCNE2 on Samsung Galaxy Note 10.1 LTE SM-P605

1. First you have to download Android 4.4.2 KitKat XXUCNE2 on your PC.

2. Now you have to download Odin to install XXUCNE2 on your Note 10.1 LTE.

3. Now you have to put your Samsung Galaxy Note 10.1 LTE SM-P605 into download mode using these steps:

  • Turn off your Galaxy Note 10.1 LTE.
  • Press Galaxy Note 10.1 LTE volume down button and home button simultaneously.
  • Press Galaxy Note 10.1 LTE Power button at the same time while pressing the Home button and volume down button of Note 10.1 LTE. You will be able to view a warning message on your Galaxy Note 10.1 LTE after some time.
  • Press Galaxy Note 10.1 LTE Power button again after viewing this warning message to put it into download mode.

4. Launch Odin on your PC and connect your Samsung Galaxy Note 10.1 LTE SM-P605 with your PC via USB cable.

5. You can see a message in the bottom left corner of Odin after connecting your Note 10.1 LTE with your PC.

6. Now you have to extract the ZIP file of KitKat XXUCNE2 on your PC downloaded in STEP 1.

7. Once you have successfully extracted the ZIP file of KitKat XXUCNE2, you have to press “PDA” in Odin and choose “.tar.md5″ file.

8. Now you have to press “PDA” in Odin and choose “modem” file.

9. Now you have to press “CSC” in Odin and choose “csc” file.

10. Press “PIT” in Odin and choose “.pit” file.

11. Now you have to press the “Start” button in Odin after selecting “Re-Partition” and “Auto-reboot” options.

You will have to wait until your Samsung Galaxy Note 10.1 LTE SM-P605 restarts. It may take around 5 minutes to reboot. Once your Note 10.1 LTE is restarted, you can enjoy KitKat XXUCNE2. If you are facing any difficulty while installing KitKat XXUCNE2, then you can share your difficulty with me in the comment section below.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>