Samsung Galaxy XCover 2 GT-S7710 has managed to attract many smartphone lovers. Androidbiits.com is going to share some good news with all Galaxy XCover 2 users. Now they can install a new firmware update. Android 4.1.2 Jelly Bean XXANE3 [S7710XXANE3] has been released for Galaxy XCover 2. Now I am ready to help you in installing Android 4.1.2 XXANE3 on your Samsung Galaxy XCover 2 GT-S7710. In the previous article, I have posted the instructions for installing Android 4.4.2 ZHUCNE3 on Samsung Galaxy Note 10.1 Wi-Fi. Now you can update Samsung Galaxy XCover 2 GT-S7710 to Android 4.1.2 Jelly Bean XXANE3.

I am expecting that you can easily update your Galaxy XCover 2 to Android 4.1.2 Jelly Bean XXANE3 after reading the steps posted in Androidbiits.com. S7710XXANE3 will bring some improvements to your Galaxy XCover 2. CWM recovery is not required to be installed on your XCover 2. Yes, you can easily root Samsung Galaxy XCover 2 GT-S7710 after installing Android 4.1.2 XXANE3. You must take a backup of all files before installing S7710XXANE3. Samsung Galaxy XCover 2 GT-S7710 USB driver is needed to be installed on your computer before connecting your device with it.

Below are the steps using which you can install Android 4.1.2 Jelly Bean XXANE3 on XCover 2 GT-S7710. Dear reader, Androidbiits.com will not be responsible if your 4 inch XCover 2 got damaged during the update process. Galaxy XCover 2 battery level must be above 82% before following these steps.

How to Install Android 4.1.2 Jelly Bean XXANE3 [S7710XXANE3] on Samsung Galaxy XCover 2 GT-S7710

1. First, you have to download Android 4.1.2 Jelly Bean XXANE3 on your PC.

2. Now you have to download Odin to install S7710XXANE3 on your Galaxy XCover 2 GT-S7710.

3. Now you have to put your Samsung Galaxy XCover 2 GT-S7710 into download mode using these steps:

• Turn off your Galaxy XCover 2.
• Press XCover 2 volume down button and home button simultaneously.
• Press XCover 2 Power button at the same time while pressing the Home button and volume down button of 4-inch XCover. You will be able to view a warning message on your Galaxy XCover 2 GT-S7710 after some time.
• Press XCover 2 Power button again after viewing this warning message to put it into download mode.

4. Launch Odin on your PC and connect your XCover 2 GT-S7710 with your PC via USB cable.

5. You can see a message in the bottom left corner of Odin after connecting your XCover 2 with your PC.

6. Now you have to extract the ZIP file of Jelly Bean XXANE3 on your PC downloaded in STEP 1.

7. Once you have successfully extracted the ZIP file of Jelly Bean XXANE3, you have to press “AP” in Odin and choose “.tar.md5″ file.

8. Now you have to press the “Start” button in Odin after selecting “Auto-reboot” option.

Now you will have to wait until your 4-inch Galaxy XCover 2 restarts. It may take around 7 minutes to reboot. Once your XCover 2 GT-S7710 is restarted, you can enjoy S7710XXANE3. In this way you can install Android 4.1.2 Jelly Bean XXANE3 on your Samsung Galaxy XCover 2 GT-S7710. If you are facing any difficulty while installing Android 4.1.2 Jelly Bean XXANE3, then you can share your difficulty with me in the comment section below.