Androidbiits.com will help you to enter fastboot mode on Redmi K60E 22122RK93C (rembrandt). This smartphone comes with corning gorilla glass victus protection, dual LED dual tone flash, Phase Detection Autofocus support, 1440 x 3200 pixels screen resolution, high dynamic range support, 6.67 inches display, 512GB internal storage space and 48 Megapixel rear camera. If you are planning to write data directly to the internal memory of Redmi K60E 22122RK93C, then you have to enter into fastboot mode. As we know writing data directly to the internal memory is an important task. You can do it after entering your phone into fastboot mode. Androidbiits.com will publish the step-by-step instructions using which you can enter fastboot mode on Redmi K60E 22122RK93C. Previously, I have published the simple instructions for entering recovery mode on Redmi K60E. Now, I will discuss about the step-by-step tutorial to enter fastboot mode on Xiaomi Redmi K60E.

Fastboot mode is very important for all Android smartphone users. I am hoping that you will be able to boot fastboot mode on Redmi K60E 22122RK93C without any problem after reading the tutorial written in Androidbiits.com. You can enter fastboot mode using button combinations. You have to press a combination of buttons on Redmi K60E 22122RK93C to enter into fastboot mode. Every Android smartphone users must know the method for entering into fastboot mode. It allows users to unlock bootloader and relock bootloader. It allows users to install custom recovery. It also allows users to install ROM on phone.

There are two methods for entering fastboot mode on Redmi K60E 22122RK93C. The first method is ADB method. You have to use ADB for entering into fastboot mode. It requires Android SDK Platform tools. You have to download and install SDK Platform tools on your PC. Then, you have to connect your Redmi K60E 22122RK93C with PC after activating Developer options and USB Debugging. The second method is button combination method. You can enter fastboot mode using button combinations on Redmi K60E 22122RK93C. It does not require any tool. This is the most popular method for entering into fastboot mode.

Below are the steps using which you can enter fastboot mode on Redmi K60E 22122RK93C. Androidbiits.com will not be responsible if your device got broken during this process. Redmi K60E battery must be above 89 percentage before entering into fastboot mode. You must follow these steps at your own risk.

How to Enter Fastboot Mode on Redmi K60E 22122RK93C Easily [Simple Steps]

1. First you have to turn off your Redmi K60E.

2. Press Volume down button and Power button simultaneously.

3. Release Volume down button and Power button after you see “Fastboot” message on screen. Your Redmi K60E will enter into fastboot mode.

How to Enter Fastboot Mode on Redmi K60E using ADB [Simple Steps]

1. First you have to enable Developer options and USB Debugging in Redmi K60E.

2. Download USB driver and install it on PC.

3. Attach your Redmi K60E with computer via USB cable.

4. Download SDK Platform tools Zip File.

5. Open platform-tools folder on your PC after extracting the ZIP file.

6. Inside the platform-tools folder, you have to press the Shift Key and Right mouse click on your PC to open the Command Window. You can also type “cmd” in the address bar and press “enter” button to open the Command Window.

7. Enter the following command to check the connected device:

adb devices

8. If your phone is successfully connected with PC, then you will be able to see a serial number.

9. Enter the following command to put Redmi K60E into Fastboot mode:

adb reboot bootloader

In this way you can enter fastboot mode on Redmi K60E 22122RK93C. If you are experiencing any difficulty while entering into fastboot mode, then don’t hesitate to share your issue with Androidbiits.com. Please submit your email address and subscribe to get more information regarding your Redmi K60E. You must check your email to activate subscription.