How to Boot Recovery Mode on Motorola Moto G7 Play (XT1952-3, XT1952-1, XT1952-5) Easily [Simple Steps]

Androidbiits.com will help you to boot your Motorola Moto G7 Play (XT1952-3, XT1952-1, XT1952-5) into recovery mode. It comes with 3000mAh battery, 149g weight, global navigation satellite system (GLONASS) support, Qualcomm SDM632 Snapdragon 632 processor, high dynamic range support, rear mounted fingerprint scanner, 8MP front facing camera, accelerometer sensor and 3.5mm audio jack. If you are planning to wipe cache partition, then you can use some simple steps to boot your Moto G7 Play (XT1952-1, XT1952-5) into recovery mode. As we know cache partition stores temporary files and logs. It is very important to wipe cache partition in Android device after every operating system update. It removes junk files. Androidbiits.com will publish the step-by-step instructions using which you can boot Moto G7 Play (XT1952-3, XT1952-1) into recovery mode. Previously, I have published the simple instructions for performing a hard reset on Huawei P8. Now, I will discuss about the step-by-step tutorial to boot Motorola Moto G7 Play into recovery mode.

I am expecting that you will be able to enter recovery mode in Moto G7 Play (XT1952-3, XT1952-1) without any problem after reading the tutorial written in Androidbiits.com. You can reboot to bootloader after entering into recovery mode. You will be able to view recovery logs on your Moto G7 Play (XT1952-1, XT1952-5). You can do various other things in recovery mode. It will allow you to apply update from adb. It will also allow you to apply update from SD card. You can run graphics test on your phone after entering into recovery mode.

If you want to make your phone quicker, then you must wipe cache partition on your Moto G7 Play (XT1952-1, XT1952-5). You can do it after entering into recovery mode. It is highly recommended to wipe cache partition in Android device after every operating system update. It removes outdated files from Moto G7 Play XT1952-3. This process is harmless because it will not delete your apps and data available on your phone. It will only delete junk files. All your messages and contacts will remain safe.

Below are the steps using which you can boot recovery mode on Moto G7 Play (XT1952-3, XT1952-1). Androidbiits.com will not be responsible if your device got broken during this process. Moto G7 Play battery must be above 86 percentage before entering into recovery mode. You must follow these steps at your own risk.

How to Boot Recovery Mode on Motorola Moto G7 Play (XT1952-3, XT1952-1, XT1952-5) Easily [Simple Steps]

1. Press the power button and switch off your Moto G7 Play.

2. Press Volume down button and Power button simultaneously on your phone.

3. Release Volume down button and Power button after you see Logo on screen.

4. You have to select “Recovery Mode” option using volume button. Keep pressing volume button until you see “Recovery Mode” option.

5. Use power button to confirm “Recovery Mode” option.

6. Press Power button and Volume up button simultaneously after you see “no command” message on Moto G7 Play. Your phone will enter into Recovery Mode after a few seconds.

In this way you can boot Moto G7 Play (XT1952-3, XT1952-1, XT1952-5) into recovery mode. If you are experiencing any difficulty while entering your device into recovery mode, then don’t hesitate to share your issue with Androidbiits.com. Please submit your email address and subscribe to get more information regarding your Moto G7 Play. You must check your email to activate subscription.

Enter your email address:

Delivered by FeedBurner

Leave a Reply