How to Hard Reset Asus ZenFone Go ZC451TG Z00SD Easily [Simple Steps]

Androidbiits.com will help you in performing a hard reset on Asus ZenFone Go ZC451TG Z00SD. It comes with 133.5g weight, 1600mAh battery, 8GB internal storage space, Mediatek MT6580M processor, 1GB Random access memory, accelerometer sensor, VGA front facing camera, Android 5.1 Lollipop operating system, 3.5mm audio jack and Mali-400MP2 graphics processing unit. This device was launched in December 2015. You can take good quality photos using 5MP rear camera. If you are facing any issue on your device, then you can use some simple steps to perform a hard reset. It will allow you to remove pattern lock and screen lock on ZenFone Go ZC451TG Z00SD. Sometimes you might have forgotten the lock screen password of your device. You might have faced difficulty in using your ZenFone Go ZC451TG Z00SD. If your device is not responding, then hard reset is a good solution. Androidbiits.com will publish the step-by-step instructions using which you can perform a hard reset on ZenFone Go ZC451TG Z00SD. Previously, I have published the simple instructions for entering fastboot mode on Lenovo K13 Pro. Now, I will discuss about the step-by-step tutorial to perform a hard reset on Asus ZenFone Go.

I am expecting that you will be able to master reset ZenFone Go ZC451TG Z00SD without any problem after reading the tutorial written in Androidbiits.com. Factory reset will remove all bugs from your phone. It will let you enjoy original factory settings on ZenFone Go ZC451TG Z00SD. Factory reset will also let you enjoy many other benefits. You should note that you don’t need root, unlock bootloader or TWRP Recovery to hard reset your device. The most important thing is that your device will not lose warranty after performing a factory reset.

If you have forgotten the lock screen password of your ZenFone Go ZC451TG Z00SD, then you must perform a hard reset. It will let you bypass screen lock. You must save your private documents securely including messages and contacts before performing a hard reset on ZenFone Go ZC451TG Z00SD, because all data will be deleted from your device after performing a hard reset.

Below are the steps using which you can perform a hard reset on ZenFone Go ZC451TG Z00SD. Androidbiits.com will not be responsible if your device got broken during the process of factory reset. ZenFone Go battery must be above 82 percentage before performing hard reset. You must follow these steps at your own risk.

How to Factory Reset Asus ZenFone Go ZC451TG Z00SD Easily [Simple Steps]

1. Press the power button and switch off your ZenFone Go.

2. Press Volume up button and Power button simultaneously on your phone.

3. Release Volume up button and Power button after you see “Boot Mode” message on screen.

4. Select “Recovery” option. You can use volume up to select this option.

5. Use volume down button to confirm “Recovery” option.

6. Press Power button and Volume up button simultaneously after you see Android Logo or “no command” message on ZenFone Go screen. Your phone will enter into Recovery Mode after a few seconds.

7. Select “wipe data/factory reset” option. You can use volume button to select this option.

8. Use power button to confirm “wipe data/factory reset” option.

9. Select “YES” option using ZenFone Go volume button. Then, press power button to confirm this option.

10. You have to select “Reboot system now” option using volume button.

11. Press power button to confirm “Reboot system now” option.

You have successfully performed a hard reset on ZenFone Go ZC451TG Z00SD. If you are experiencing any difficulty while performing hard reset on your ZenFone Go, then don’t hesitate to share your issue with Androidbiits.com. Please submit your email address and subscribe to get more information regarding your ZenFone Go. You must check your email to activate subscription.

Enter your email address:

Delivered by FeedBurner

Leave a Reply