Are you using Samsung Galaxy Note 10.1 GT-N8000? If you are a diehard fan of Samsung tabs, then you must know about Galaxy Note 10.1. Today, I am going to share a piece of good news with Samsung Galaxy Note 10.1 GT-N8000 users. Now you can install a new firmware update on your device. Android 4.4.2 KitKat XXUDNE4 has been released for Note 10.1 GT-N8000. In the previous article, I have posted the steps for updating Samsung Galaxy Note 2 to IllusionRom. Now you can update Samsung Galaxy Note 10.1 GT-N8000 to Android 4.4.2 KitKat XXUDNE4.
This is really a great news for Galaxy Note 10.1 GT-N8000 users. You can experience the improvement after installing KitKat XXUDNE4. The good news is that you can easily root your Samsung Galaxy Note 10.1 GT-N8000 after installing KitKat XXUDNE4. Well, you don’t need to install CWM recovery on Note 10.1 before updating it. My dear friend you will have to backup your contacts, photos, videos, and messages available on Note 10.1 before following the steps. Samsung Galaxy Note 10.1 GT-N8000 USB driver need to be installed on your PC for successful connection between your Note 10.1 GT-N8000 and PC.
You can follow the steps posted below to install KitKat XXUDNE4 on Galaxy Note 10.1 GT-N8000. Androidbiits will not be responsible if your 10.1 inch Samsung device got corrupted during the update process. Your Samsung Galaxy Note 10.1 GT-N8000 battery level must be above 82% before following these steps.
How to Install Android 4.4.2 KitKat XXUDNE4 on Samsung Galaxy Note 10.1 GT-N8000
1. First you have to download Android 4.4.2 KitKat XXUDNE4 on your PC from the given link.
sammobile.com/firmwares/3/?download=30234
2. Now you have to download Odin to install XXUDNE4 on your Note 10.1 GT-N8000.
devfiles.co/download/CAHmXM6c/Odin_v3.09.zip
3. Now you have to put your 10.1 inch Samsung device into download mode using these steps:
- Turn off your 10.1 inch Samsung device.
- Press Galaxy Note 10.1 GT-N8000 volume down button and home button simultaneously.
- Press Galaxy Note 10.1 GT-N8000 Power button at the same time while pressing the Home button and volume down button. After a few seconds, you will be able to see a warning message on your 10.1 inch Samsung device.
- Press Galaxy Note 10.1 GT-N8000 Power button again after viewing this warning message to put it into download mode.
4. Launch Odin on your PC and connect your 10.1 inch Samsung device with your PC via USB cable.
5. You can see a message in the bottom left corner of Odin after connecting your Galaxy Note 10.1 GT-N8000 with your PC.
6. Now you have to extract the ZIP file of KitKat XXUDNE4 on your PC downloaded in STEP 1.
7. Once you have successfully extracted the ZIP file of KitKat XXUDNE4, you have to press “PDA” in Odin and choose “.tar.md5″ file.
8. Now you have to press “PDA” in Odin and choose “modem” file.
9. Now you have to press “CSC” in Odin and choose “csc” file.
10. Press “PIT” in Odin and choose “.pit” file.
11. Now you have to press the “Start” button in Odin after selecting “Re-Partition” and “Auto-reboot” options.
You will have to wait until your Samsung Galaxy Note 10.1 GT-N8000 restarts. It may take around 7 minutes to reboot. Once your 10.1 inch Samsung device is restarted, you can enjoy KitKat XXUDNE4. If you are facing any difficulty while installing KitKat XXUDNE4, then you can share your difficulty with me in the comment section below.